- Products
- Headend/Inside Plant
- Outside Plant
- MDU Solutions
- UCrypt Bulk QAM to QAM / IP / Analog & IP to QAM
- Digital Video Insertion
- Audio/Video Deletion/Insertion
- Digital Voice (VoIP) Switches
- Apartment Amplifiers
- Apartment Nodes
- FiberLinx Optical Connectivity Products
- RF Filters
- Uninterruptible Power Supplies
- 90 to 60 VAC Power Converters
- Power Passers for DTAs
- Subscriber Products
- Test & Status Monitor/Control
- Campus / Education / Institutions
- Search by Brand
- Support
- About Us
- Contact Us
Other Filters
The following is a list of other RF filters that are not specific to outside plant.
Narrow Band Bandpass
The NB-8705R is designed to isolate a desired carrier and suppress interfering, unwanted carriers in CATV headends.
Narrow Band Bandpass Filter Overview & Specifications Pdf
Highly Selective Bandpass
The BP-8710 is used to suppress strong adjacent carrier interference while maintaining superior group delay in CATV, LAN, headend, and network applications.
Highly Selective Bandpass Filter Overview & Specifications Pdf
Indoor Channel Deletion (Analog & QAM)
These channel deletion filters will delete an entire channel and allow a new channel to be reinserted.
Indoor Channel Deletion Filters (Analog & QAM) Overview & Specifications Pdf
General Bandpass
The BP-8720 has increased selectivity making it suitable to suppress adjacent channel interference and off-air interference with CATV, LAN, SMATV, and MATV headend applications.
General Bandpass Filter Overview & Specifications Pdf
Noise Filter for Fiber Optic Systems
The WBP-9340 allows signals between two customer specified 3 dB points (knees) to be passed with anything outside this bandwidth being rejected. These filters are typically used in fiber optic transmission links to remove unwanted distortions.
Noise Filter for Fiber Optic Systems Overview & Specifications Pdf
Split Band Filter for Fiber Optic Links
The DXP-9455 is a selective diplex filter that provides customer specified 1 dB points that cross over so the passband is removed from the filter knee ensuring low group delay. The passband has less than 1 dB ripple to 750 MHz.
Split Band Filter for Fiber Optic Links Overview & Specifications Pdf
High Performance Diplex Filter Network
The DXP-9655-D high performance filters are used to separate or combine Sub VHF and VHF frequencies. It is designed for headend applications to launch and/or combine upstream and downstream signals.
High Performance Diplex Filter Network Overview & Specs Pdf
Pilot Carrier Trap
The PCT-8780 suppresses pilot carriers used in transmission systems. The small size and temperature stability make it suitable to be installed in the AML receiver. It can be used to remove pilot carriers in other CATV applications.
Pilot Carrier Trap Overview & Specifications Pdf
Overview of All RF Filters
Overview of All RF Filters Pdf
Ordering Information
Each pdf file above contains overviews, specifications, and ordering information.
Narrow Band Bandpass
The NB-8705R is designed to isolate a desired carrier and suppress interfering, unwanted carriers in CATV headends.
Narrow Band Bandpass Filter Overview & Specifications Pdf
Highly Selective Bandpass
The BP-8710 is used to suppress strong adjacent carrier interference while maintaining superior group delay in CATV, LAN, headend, and network applications.
Highly Selective Bandpass Filter Overview & Specifications Pdf
Indoor Channel Deletion (Analog & QAM)
These channel deletion filters will delete an entire channel and allow a new channel to be reinserted.
Indoor Channel Deletion Filters (Analog & QAM) Overview & Specifications Pdf
General Bandpass
The BP-8720 has increased selectivity making it suitable to suppress adjacent channel interference and off-air interference with CATV, LAN, SMATV, and MATV headend applications.
General Bandpass Filter Overview & Specifications Pdf
Noise Filter for Fiber Optic Systems
The WBP-9340 allows signals between two customer specified 3 dB points (knees) to be passed with anything outside this bandwidth being rejected. These filters are typically used in fiber optic transmission links to remove unwanted distortions.
Noise Filter for Fiber Optic Systems Overview & Specifications Pdf
Split Band Filter for Fiber Optic Links
The DXP-9455 is a selective diplex filter that provides customer specified 1 dB points that cross over so the passband is removed from the filter knee ensuring low group delay. The passband has less than 1 dB ripple to 750 MHz.
Split Band Filter for Fiber Optic Links Overview & Specifications Pdf
High Performance Diplex Filter Network
The DXP-9655-D high performance filters are used to separate or combine Sub VHF and VHF frequencies. It is designed for headend applications to launch and/or combine upstream and downstream signals.
High Performance Diplex Filter Network Overview & Specs Pdf
Pilot Carrier Trap
The PCT-8780 suppresses pilot carriers used in transmission systems. The small size and temperature stability make it suitable to be installed in the AML receiver. It can be used to remove pilot carriers in other CATV applications.
Pilot Carrier Trap Overview & Specifications Pdf
Overview of All RF Filters
Overview of All RF Filters Pdf
Ordering Information
Each pdf file above contains overviews, specifications, and ordering information.
Related Products: